1. Review of the unit
   • Base Unit - Start/Cancel/Reset button
   • Selector Mode (Two Modes, Spray Bottle and All Other Attachments)
   • Display
   • Center location for the attachments to sit
   • 3' power cord
   • .8 Amps
2. Review filling the attachments
   • The attachments must be removed from the base unit before filling.- The item you are processing must be placed in the attachment before filling with water.
   • Each attachment has a max fill line and the attachment must be filled with Municipal treated or equivalent or bottled water.
   • Once the attachment is filled it must be placed on the base unit securely. ( note any direction is fine)
   • The attachment has a mode symbol on it and the same symbols are displayed on the display. Ensure the two mode symbols match. Use the mode button to toggle between the two and select the correct one.
3. Processing time
   • The processing time varies from a minimum of three minutes to a maximum of eight minutes. The processing time depends on the quality of the water and the contamination on the item being sanitized.
   • The unit has an automatic timer, which counts down from 15 minutes once the processing is complete in the spray bottle. This is the time allotted for using the water in its purest form in the spray bottle.
   • The unit has an automatic timer, which counts down from 2 minutes once processing is complete within the multipurpose bowl attachment and all other attachments. It is recommended to leave the multipurpose bowl attachment etc. in the bowl, for the two minutes, to receive the maximum kill rate.
4. Controls Review
   • Start/Cancel/Reset Button — this is used to turn the unit on, stop the unit in mid cycle and reset the unit in the event a function code is displayed.
   • Attachment Selector Mode — this is used to toggle between the mode symbols for processing. The mode symbol on the display should match the mode symbol on the attachment.
   • Display — this is used to indicate the percentage of processing complete. It begins at zero percent and incrementally increases by one percent, ending at one hundred percent. The attachment selector mode symbol is displayed. The time left for usage of the water is counted down, which is up to a maximum of 15 minutes for the spray bottle. The time to leave the item in the soak bowl, toothbrush attachment, knife attachment or baby bottle attachment for maximum sanitization is 2 minutes. If the unit experiences a problem a function code will be displayed in order to trouble shoot the problem.
5. How to change the lotus® Filter Cartridge?
   • Once the filter indicator is solid on the display, then it is time to change the filter.
   • To remove the expired lotus® Filter Cartridge, place your fingers on the top and pull up from the main unit.
   • Remove the new lotus® Filter Cartridge from the plastic bag.
   • Insert the new lotus® Filter Cartridge into the main unit until it is firmly in place. Note: The filter orientates with the eye to the back.
   • Reset the filter indicator by pressing and holding the attachment selector button until the filter indicator goes out.

1. What happens if I accidentally press the Start/Cancel/Reset Button and there is not an attachment on the base unit?
   Your lotus® Home Cleaning System will determine that something is wrong and the display will flash with a function code "F3" accompanied by a series of beeps. Press the Start/Cancel/Reset button to reset the unit. Fill your attachment to the max fill line with cold tap water, place on the base unit and press again to begin the cycle from the start.
2. What do I do if I want to change the attachment part way through a cycle?
   If the process has already started and you want to change to a different attachment simply press the Start/Cancel/Reset button. This will display an "F2" on the display, then press the Start/Cancel/Reset button again to reset the unit. After the attachment has been changed, press your Attachment SELECTOR button to select the correct mode and press your Start/Cancel/Reset button again to restart the process from the beginning.
3. How long do I have to use the water in the Spray Bottle before it reverts to normal tap water?
   You have 15-minutes to use the water in the spray bottle after the liquefied ozone processing cycle is complete. Your lotus® Home Cleaning System counts down for you and lets you know when the liquefied ozone has reverted back to ordinary tap water.
4. What type of water should I use with my lotus® Home Cleaning System?
   Please use cold municipal treated or equivalent or bottled water ONLY.
5. How do I know if the unit is working and generating liquefied ozone?
   A visual indicator on the unit will show 100% when the water has become 'fully charged' liquefied ozone.
6. Can I use the water in the spray bottle after 15 minutes?
   You can use it as a cleaner for up to 45 minutes as an effective cleaner, but because liquefied ozone reverts back to water, it loses its maximum power to kill germs after 15 minutes.
7. How do I care for my lotus® Home Cleaning System?
   Your lotus® Home Cleaning System is self-cleaning and as such caring for it is simple. Attachments like the bowl may be cleaned occasionally using dish soap and warm water. - Always unplug your lotus® Home Cleaning System prior to cleaning. - Only a damp cloth should be used to wipe down your unit. - Never immerse your lotus® Home Cleaning System in water or any other liquid for cleaning. - Never use abrasives, detergents or strong cleaning agents.
8. What is the processing time of the lotus® Home Cleaning System in each of the modes?
   The lotus® Home Cleaning System will process a minimum of approximately three (3) minutes up to a maximum of eight (8) minutes in the wavy lines selector mode (select this setting for the Spray Bottle Attachment only) will process for approximately four minutes up to a maximum of eight minutes in the wavy lines/arrow selector mode (select for use with the Multi-purpose Bowl Attachment, Toothbrush Attachment, Baby Bottle Attachment and the All Purpose Attachment).
9. What is the number displayed during processing on the display on the lotus® Home Cleaning System?
   The numbers displayed are the percentage of processing completed, starting with 0% and increasing to 100% when complete charging is completed.
10. When the processing is completed the display shows "15 Min" or "2 Min". What does this mean?
    The spray bottle contains liquefied ozone, which can be used for 15 minutes for maximum germ killing and stain removal. Once the 15-minute period is over the water in the spray bottle has reverted to become a cleaner only. The spray bottle should be re-filled and processing cycle started again if maximum strength is desired. The display will show "2 Min" when using the Multi-purpose bowl mode. The maximum bacteria and toxin reduction is achieved when your fruits and vegetables are left in the unit for the additional "2 Min". (Applicable to the knife/toothbrush attachment and baby bottle attachment as well)
11. Can I use the lotus® Home Cleaning System on voltage other than 120V 60mhz?
    The lotus® Home Cleaning System is designed for use in North America and may only be used on 120v 60mhz ratings. The unit will not function with 220V, or on 50Hz.
12. Can I use the lotus® Home Cleaning System with a power converter?
    The lotus® Home Cleaning System is not designed to work with a power converter for overseas use. The system is designed for 120V60mhz only.
13. How much power does the lotus® Home Cleaning System use when processing?
    The power consumption per one cycle of the lotus® Home Cleaning System is 30 watts. The estimated cost per cycle is 1/50th of a cent. (Note: based upon 30 watts of power consumption for 250 seconds per cycle and .10 cents per kWh for electricity)
14. How much power does the lotus® Home Cleaning System use when in stand-by mode?
    The power consumption when the lotus® Home Cleaning System is plugged in and in stand-by mode is approximately 1.2 watts. The estimated cost to plug the unit in is .32 cents per day. (Note: based upon 1.2 watts of power consumption, 24 hours per day and .10 cents per kWh)
15. What are the amps of the lotus® Home Cleaning System?
    The amps of the lotus® Home Cleaning System are .80.
16. How do I select the mode to use for lotus® Home Cleaning System?
    Use the Attachment Selector Button to choose the appropriate symbol for the attachment being used. The mode is determined by matching the symbol displayed on the display to the symbol on the attachment. Here is a guideline for the modes:
    
    • Spray Bottle Attachment - wavy lines icon,
    • Bowl, toothbrush, baby bottle attachments — wavy lines with arrow
17. How often should the lotus® Filter Cartridge be replaced in my lotus® Home Cleaning System?
    The lotus® Home Cleaning System Filter Cartridge should be replaced every three months, however this is dependent upon usage and the humidity of your climate. The estimated usage is based upon the average household of a family of four using the product twice per day.
18. How do I know when to change the lotus® Filter Cartridge?
    The filter cartridge indicator will change from orange to green. When the indicator is solid green it is time to change the cartridge.
19. What is the purpose of the lotus® Filter Cartridge?
    The filter cartridge removes the excess humidity in the air allowing the lotus® Home Cleaning System to infuse more oxygen into the water, thereby maximizing effectiveness.
20. Does the lotus® Home Cleaning System shut down once the indicator turns green?
    The lotus® Home Cleaning System does not shut down once the indicator turns green, however the effectiveness of producing super oxygen is reduced and therefore the sanitizing force of the lotus is reduced. It is important to change the filter cartridge on the lotus® Home Cleaning System to maintain peak performance.
21. How do I change the lotus® Filter Cartridge?
    Unplug the lotus® Home Cleaning System from the power outlet. 2) Remove the used filter cartridge. 3 Open the bag with the new filter cartridge. 4. Insert the new filter cartridge into the lotus unit and press gently to ensure a snug fit. The filter will only go into the unit one direction with the eye facing outwards and the slot facing inwards. 5. Then plug the lotus® Home Cleaning System into a power outlet and it is ready for use. Note: The status indicator on the new lotus® Filter Cartridge will be orange.
22. How do I dispose of the lotus® Filter Cartridge?
    Keep it and return it to your Independent Distributor for recycling.
23. Do I cut my vegetables before processing?
    The fruits and vegetables should be placed in the lotus® Home Cleaning System whole. The purpose of the lotus® Home Cleaning System is to remove the harmful bacteria and pesticides from the skin of your fruits and vegetables. Many fruits and vegetables are grown at ground level and the outer skin may be contaminated. The contamination is automatically transferred to the edible portion of your fruits and vegetables by the knife when you cut them. Therefore always process your fruits and vegetables whole for the most effective sanitizing.
24. What types of fruits and vegetables should I use the lotus® Home Cleaning System on?
    The lotus® Home Cleaning System can be used with all types of fruits and vegetables by either using the Multi-purpose Bowl attachment or the Spray bottle Attachment. It would be impossible for you to place a melon in the bowl whole, but to remove contaminants from the outer skin, process a Spray Bottle of water. Using the spray bottle, saturate the outer skin and wipe clean with a clean cloth.
25. I want to process my meat, fish or poultry, how do I do this?
    Use the Multi-purpose bowl attachment and lid and fill to the max fill line with plain cold water. Place the Bowl Attachment on the lotus® Home Cleaning System, select the proper mode and process the plain water. Once the system has reach "100%", remove the attachment, place on the countertop or sink and drop your meat, fish or poultry into the water. The meat, poultry and fish should remain in the water for the "2 minute" period displayed on the display. Once the display reads "end", drain the water from the meat and begin preparation. Note: It is very important to thoroughly wash and rinse your soak bowl and lid to avoid cross contamination. The lotus® Home Cleaning System is self-cleaning, but you should wash the bowl and lid thoroughly, then fill with cold clean water and run a second cycle of plain water. The second cycle cleans, sanitizes and disinfects your bowl for future use. Tip: You can use the water from the second cycle to water your plants or disinfect your sink. The other alternative is to process a spray bottle of cold tap water. Once the cycle has reached the end, remove the spray bottle and thoroughly spray the meats. The liquefied ozone from the spray bottle will kill pathogens effectively.
26. I received lotus® Cleaning Cloths in the box, how do I wash this product?
    The lotus® Cleaning Cloths may be washed and reused up to 300 times. The lotus® Home cleaning cloths may be washed at a water temperature, which does not exceed 95°F, on a regular cycle separately or with no lint items. It is important to wash frequently. The cloths may be dried on a tumble dry cycle at any heat. Do not iron or bleach.
27. What is the material content of the lotus® Cleaning Cloths?
    The lotus® Cleaning Cloths are made of 70% Polyester and 30% Polymide.
28. How do I use the lotus® Cleaning Cloths?
    The lotus® Cleaning Cloths may be used dry for dusting T.V. screens, furniture, lamps, knick knacks, pictures & windows, counter tops, appliances or car interiors. Please use caution when using the lotus® cleaning cloths dry, as the cloth itself does not scratch; however it may pick up substances that do. It is important before usage to test inconspicuous areas first. The lotus® Home cleaning cloths may be used with liquefied for any and all cleaning.
29. What is the life expectancy of the lotus® Cleaning Cloths?
    Up to 300 cycles. It is important to wash the lotus® Home cleaning cloths frequently and they may be washed and reused up to 300 cycles.
    

Tap and Bowl Symbol
The appearance of Tap and Bowl warning is normal. It is designed to let you the consumer know that whatever you are cleaning in the bowl attachment, such as fruits or vegetables, contains a high level of contaminants. In these cases the items you are processing require more contact time with the liquefied ozone in order to achieve maximum cleaning. You may notice that progress slows down - this is to increase the contact time with the liquefied ozone to allow removal of the extra contaminants. We recommend draining the water from the bowl after each Tap and Bowl warning, refilling with fresh water and re-processing, allowing more contact time for the ozone to counteract stubborn contaminants and ensure the 99.9% sanitizing level.

However, in some cases the cause of the Tap and Bowl Symbol could even be tap water with high levels of contaminants. It may be necessary to use purified, filtered or bottled water.

In some cases the cause of the F1 code could be tap water if it contains high levels of contaminants. It may be necessary to use the water purified by the lotus Home water treatment system. Signs that you tap water may be contaminated are that the lotus Home cleaner does not reach 100% using the sprat bottle attachment.

To be absolutely sure:

1. Try processing a Spray bottle of lotus Home treated or bottled water.
2. If it reaches 100% it means that the previous water you have been using is contaminated.
3. If the system gives a second F1 code, your system may be malfunctioning. Please contact Tersano customer care.

If you are not able to reach 100% with the bowl attachment when processing items in the bowl, such as fruits or vegetables, then the items may have high levels of contaminants, such as pesticides. In this case, follow these instructions:

1. Drain the water out of the attachment, rinse the item (lightly hand scrubbing them) and refill with fresh cold water. Place on the base and begin the cycle again.
2. Remember to rinse your fruits and vegetables before processing them. This removes loose contaminants such as dirt.
3. Try and keep your produce whole, as the unit reacts to juices from fruits or vegetables as contaminants.
4. Do not overfill bowl with water (fill enough to cover vegetables and fruits and ensure there is good circulation around them).
5. Ensure the attachment is firmly on the unit, by pressing down on the attachment once it is on the unit.
6. Fill the Bowl 1/2 full with produce first and fill to the max fill line with water, to ensure good circulation around the items you are cleaning.
7. If you have to process something that doesn't fit, such as a head of lettuce, then we recommend cutting it in half. Otherwise use the spray bottle attachment to apply liquefied ozone, or put items in a separate bowl and pour the processed water over them and let it sit for 2 minutes (which is what we recommend to do with meats and seafood).

If you have not been able to reach 100% with the bowl attachment when processing items in the bowl, such as fruits or vegetables, then the items may have high levels of contaminants, such as pesticides. At which point we advise you to follow the following instructions and tips in order to lower your chances of experiencing the Tap and Bowl Symbol:

1. Drain the water out of the attachment, rinse the produce (lightly hand scrubbing them) and refill with fresh cold water. Place on the base and begin the cycle again.
2. Try and keep your produce whole, as the unit sees the juices from the fruits or vegetables as a contaminant.
3. It is important to not overfill the bowl with fruits or vegetables. Usually fill the bowl half full with fruits or vegetables and the balance with water. You want to ensure good circulation around the fruits and vegetables in order to effectively remove contaminants.
4. Ensure the attachment is firmly on the unit, by pressing down on the attachment once it is on the unit.
5. If you have to process something that doesn't fit, such as a head of lettuce, then we recommend cutting it in half. Otherwise use the spray bottle attachment to spray large item down, or put items in a separate bowl and pour the processed water over them and let it sit for 2 minutes (which is what we recommend to do with meats and seafood).
6. There are some fruits and vegetables, which are highly contaminated and may require multiple cycles. Our experience has show that strawberries, raspberries, blackberries and grapes are the most common fruits, which cause multiple Tap and Bowl Symbols. If by the third cycle you are still experiencing a Tap and Bowl Symbol, we recommend leaving the fruits or vegetables in the water for 2 to 5 minutes and then thoroughly drain them. The system may have removed between 90 to 99% of the contaminants after the third cycle.
7. In certain situations, we recommend you run two cycles with the spray bottle using purified water to clean the sensors and the unit and then proceed to run the items in your bowl. Sometimes the sensor can get dirty and the plain water in a cycle will clean it up.
8. In addition, we recommend to wash the bowl in warm soapy water to remove and dirt or debris built up in the base of the bowl. Ensure it is rinsed thoroughly before using.

If you follow these tips and you continue to experience the Tap and Bowl symbol, or if you have further questions or concerns, do not hesitate to contact us at
1-800-808-1724 and we will be glad to assist you.

lotus® Home Cleaning System Function Codes Troubleshooting

Click on the Function Code you have received:
Filter Icon is Flashing
Filter Icon is Solid
F3 | F4 | F6 | F7 | F8 | F9 | F10 | F11 | F12